SY Series The Low-temperature Drying Equipment

SY Series The Low-temperature Drying Equipment

Using the low temperature closed drying mode without odor spillover, without having to install complex deodorization device, separate layer wind system, meet the requirements of wet mud rapid dehydration, low temperature drying cycle short, modular structure design, convenient installation, transfer, feeding motor adopts frequency conversion infinitely adjustable-speed, Pasteur (ba) sterilization method, dry dirt effectively 90%, bactericidal properties stable, no secondary pollution, can be directly to 83% moisture content of sludge drying below 10%, maximum reduction.

Contact Us

SY Series The Low-temperature Drying Equipment Details

The Low-temperature Drying Equipment(Chain net type、Continuous)

Model

SYDD1200FL

SYDD2400SL

SYDD4800SL

SYDD7200SL

The standard of water / 24h

1200KG

2400KG

4800KG

7200KG

Go to the water/h

50KG

100KG

200KG

300KG

The total power

15kW

30kW

56kW

84kW

Heat pump module number

1

1

2

3

Compressor stations

2

4

8

12

Cooling h

FL/SL

The cooling water flow ℃

/

1.5m3/h

3m3/h

4.5m3/h

▲t=15℃

Refrigerant

R134a

The power supply

220/V380V/440V/3H/50HZ(60HZ)

The drying temperature

48~56~0 (Return air) /65—80C (Air supply)

Control system

Touch screen + PLC programmable controller + inverter control

Wet mud

Moisture content (70%-83%) other moisture content (custom)

 

Sludge low temperature drying

The dehumidification heat pump is used to heat and evaporate the air to dry the sludge and hot air circulation convection is used to remove wet drying.

 

Convection hot air circulation

Using dry hot air or other media, the moisture in the sludge absorbs the heat in the air and evaporates into the air. The hot and humid air is condensed, dehumidified and heat recovered to achieve the purpose of drying and energy saving.

 

Dehumidification heat pump

The heat recovery technology is used to heat the air after several times, so that the water has been evaporated and the cooling system is used to precipitate water. Evaporation — dehumidification - warming - evaporation -dehumidification, it is actually equal to the organic combination of dehumidification heat pump + heat recovery technology + material conveying system.

CONTACT WITH US
  • captcha